Description
Technical specifications :
Density: approx. 0.8g/cm³
Flash point: > 27°C
Appearance: opaque, gel-like paste
Odour: aromatic
Application area:
Para remover manchas de óleo e impurezas semelhantes de superfícies de pedra natural, placas de aglomerado, betonilhas de cimento e superfícies absorventes semelhantes.
O produto ideal para bancadas de cozinha, mas também para caminhos de acesso e outras superfícies.
Instructions for use:
Apply or impregnate a thick layer of Lithofin OIL-EX to the dry surface using the plastic spatula. The thickness of the layer should be around 2 mm.
Leave to dry for about 12 hours; cover the surface if necessary to avoid drying too quickly.
After complete drying (a state you will recognise by the paste that has turned into a layer of white powder), sweep or wipe off any residual dust.
Remove deeper impurities with a second or third cleaning.
Important: do not apply at a temperature below 10°C or above 25°C.
Do not use on varnished, coated or solvent-sensitive surfaces, or on plastic surfaces. If in doubt, test on an inconspicuous surface.
Observations: When used on dark-coloured natural stones, it is possible that dust remains in the pores of the stone.
These residues will disappear on their own over time or can be removed with the basic cleaning product Lithofin MN Multi-Netoyant.
Coverage : aprox. 0.5m²/kg when applying a layer of 2 mm.
Download Technical Datasheet
Download Safety Data Sheet
Download Sheet Ingredients according to Reg (EC) No. 648/2004 (EU)
