Additional information
| Packing | 1 Lt |
|---|---|
| Indicated for | Granite, Limestone, Marble |
Characteristics
Instructions
Before using the Cliny product, make sure that the surface you are going to work on is clean of any particles and dry. Before starting to work with Cliny, you must wear personal protective material (goggles, gloves and mask). Place the cloth over the stain you want to remove, and cover the cloth with a plastic sheet. Insulate the area where you placed the plastic with adhesive tape, so that the plastic completely isolates the surface to be treated, thus preventing the evaporation of the Cliny product, and thus obtaining a more effective result. You should let the product act for 12-24 hours. If the problem persists, you should repeat the procedure until the stain disappears completely.
After checking the disappearance of the stain, you should clean the surface with running water, and if the surface was previously polished, you should polish it again.
Warnings
Apply at an ambient temperature between 10° C – 20° C. Keep out of reach of children. Do not disperse into the environment. Before use, consult the safety data sheet and label, in which risks, and safety are highlighted for the correct use of personal protective equipment. All information contained in this page is based on information we believe to be reliable; however, not knowing the conditions of the materials treated and the way you use the product, IBERDIN declines all responsibility about The suitability of the material for each particular application. Store the product in the original containers and hermetically closed. Store the product at a temperature between 5° C – 20° C. If stored as indicated above, the product has a shelf life of 12 months. It is advisable to carry out preventive tests on small areas as our responsibility is limited at the cost of the product. No liability for damage caused by negligence or misuse of the product.
| Packing | 1 Lt |
|---|---|
| Indicated for | Granite, Limestone, Marble |