Description
Application areas:
For protecting absorbent materials
• Ceramic tiles, terracotta tiles
• Natural stone (including polished), e.g. granite, gneiss, marble, limestone
• Concrete stone
Product benefits:
• Protects against oil and grease
• Does not affect appearance
• Facilitates maintenance
• Long-term effect
• Easy to apply
• Indoor and outdoor use
Instructions for use:
– Try it in an inconspicuous area.
1. Shake before use.
2. Apply evenly and generously.
– On highly absorbent surfaces, apply two coats.
– On polished surfaces, wipe several times to ensure even application.
3. Avoid puddles and streaks, remove residue with a squeegee and polish with a cloth within 20 minutes.
Observations:
• The surface must be absorbent, dust-free, clean and completely dry.
• Suitable tools: cloth, brush, roller, mop.
• Treat large surfaces in sections of around 10-15m².
• Application temperature: 10-25°C. Reduce or switch off the floor heating.
• Do not walk on the surface until it is dry.
Important: ANon-absorbent surfaces (e.g. glazed, resinous or damp) cannot be impregnated. Sensitive stones such as polished limestone, marble,
terrace, etc., may be left with dull spots. If in doubt, try the product on an inconspicuous area. Always test the suitability of porcelain tiles, polished marble and limestone. Always treat the entire surface in a single room. Some stones may darken. Does not protect against acids. Avoid splashes on sensitive surfaces.
Retouching impregnated surfaces: apply the product in a thin layer and rub the surface with a cloth.
Drying time: about 1 hour. The treatment is fully effective after 48 hours. Do not cover the surface before this time.
Coverage : 5-8 m² per litre on rough concrete stone, up to 10m² on rough limestone, up to 20m² on polished hard stone.
Packaging closed, cool and dry. Shelf life of approximately 3 years. Opened containers should be consumed without delay.
We recommend: re-treat the surface when the effect begins to fade. It is recommended to refinish the surface after 3-5 years.
Surfaces subject to intense wear, such as kitchen worktops, vanity tops, etc., should be refinished once a year to maintain optimum effectiveness.
Use Lithofin MN Wash & Clean for daily cleaning of all surfaces.
daily cleaning of all surfaces.
LITHOFIN offers a wide range of top quality speciality products for the maintenance, protection and restoration of natural stone, artificial stone, terrazzo, porcelain, ceramic, terracotta and terracotta tiles.
Download Technical Datasheet
Download Safety Data Sheet
