Description
Areas of application:
To protect stone with polished or rough surfaces and simplify maintenance.
– For example, granite, gneiss, marble, limestone, slate and concrete stone
Product benefits:
– Protects against water and oil and reduces the tendency to stain.
– Does not alter appearance
– Long-term effect
– Easy to apply
– For indoor and outdoor use
Instructions for use:
– The surface must be absorbent, clean and absolutely dry.
– Shake well before use.
– Always test on an inconspicuous area before application.
1. Apply to small areas evenly and generously and leave to penetrate for around 15 minutes.
2. Repeat distribution and remove puddles and stains.
– On very absorbent surfaces, add more product.
3. Remove the excess completely within 30 minutes – with a squeegee or cloth. Remove any remaining residue with a towel.
4. Leave to dry for 1-2 hours.
Notes:
– Suitable application tools: cloth, sponge, woollen polishing beret.
– Non-absorbent or damp surfaces cannot be treated.
– Application temperature: 10-25°C. Switch off the floor heating.
– Larger areas should be treated in sections of 10-15m².
– Protect glass, polish, plastics and similar sensitive surfaces from splashes.
– Do not walk on wet surfaces.
– Some types of stone can become darker. Marble and limestone remain sensitive to acid.
Important: the liquid product must penetrate the stone. Do not allow product residue to dry on the surface. Dried product residues should be removed within 24 hours using a microfibre cloth or a white emulsifying disc. For more information, see the technical data sheet.
Drying time: 1-2 hours for the surface to dry. Approximately 24 hours for the product to dry completely. Do not cover the surface before then and clean up any spillages immediately. The treatment is completely cured after about 5 days.
We recommend: re-treat the surface when the effect begins to fade. It is recommended to refinish the surface after 3-5 years.
Surfaces subject to intense wear, such as kitchen worktops, vanity tops, etc., should be refinished once a year to maintain their maximum effectiveness.
Use Lithofin MN Wash&Clean for daily cleaning on all natural stone floors and Lithofin MN Easy-Clean on worktops.
LITHOFIN offers a wide range of top quality speciality products for the maintenance, protection and restoration of natural stone, artificial stone, terrazzo, porcelain, ceramic, terracotta and terracotta tiles.
Download Techinical Data Sheet
Download Safety Data Sheet
